Table of Contents
Advertisement
For the user name and password of the access
authentication, check "User Name" and
"Password" in the NETWORK SET menu
(page 114).
7
Input the user name and password, then
select "OK."
Connecting with the Wireless LAN
Station Mode
The camcorder connects to an existing access
point of the wireless LAN as a client. The
camcorder and device connect via the access
point.
Smartphone/
tablet
Connecting to the access point with the
WPS function
If the access point is compatible with the WPS
function, you can connect to the access point with
simple settings. If the access point is not
compatible with the WPS function, see "To
connect to the access point in the station mode
without the WPS function" (page 76).
1
Turn the access point on.
2
Turn the camcorder on.
62
Connecting to Other Device via Wireless LAN
Computer
Access
point
3
Set "NW&Proxy/USB" (page 114) in
the NETWORK SET menu to
"Network&Proxy."
Note
It may take time (for about 1 minute) until the
wireless LAN function is activated.
The radio wave intensity indication on the LCD/
EVF screen flashes. Wait until the radio wave
intensity indication stops flashing.
4
Set "Network Mode" in the
NETWORK SET menu (page 114) to
"Station."
Note
It may take time (for about 1 minute) until the
camcorder is in the station mode.
5
Execute "WPS" in the NETWORK
SET menu.
6
Press the WPS button of the access
point.
For the operation of the WPS button, refer to
the operating instructions of the access point.
When the connection is completed, the radio
wave intensity indication on the LCD/EVF
screen lights at a strength of more than 1.
Note
If the connection fails, perform steps from step 1
again.
7
Connect the device to the access point.
For connecting, refer to the operating
instructions of the device.
8
Start the browser on the device, then
access to "http://<IP address that the
access point assigns to the
camcorder>:8080/index.html."
For the camcorder's IP address, check "IP
Address" in the NETWORK SET menu
(page 116).
The screen for inputting "User Name" and
"Password" appears.
For the user name and password of the access
authentication, check "User Name" and
"Password" in the NETWORK SET menu
(page 114).
9
Input the user name and password, then
select "OK."
- Quick Links:
- Video Formats
- White Balance
Hide quick links:
Advertisement
Table of Contents
