Table of Contents
Advertisement
CONFIGURATION GUIDE
NIC Teaming feature – NIC Teaming and bonding features
NIC Teaming and bonding features are available with this server to provide network redundancy and load
balancing for higher network reliability and optimized network loads.
Windows Server 2012 (and later) and Linux environement, network redundancy is supported with
Taming/Bonding functions supported by OS.
See the table below for supported network interfaces, operation mode and number of teams.
◆Windows Teaming
Network Interface
NE3304-151M/-152M
(1000BASE-T)
NE3304-149
(10GBASE-SR)
NOTE:
Teaming with one port shared among multiple teams: Not supported
Network interface for teaming should be all the same.
Teaming of the port using iSCSI: Not supported
◆Linux Bonding
Network Interface
NE3304-151M/-152M
(1000BASE-T)
NE3304-149
(10GBASE-SR)
NOTE:
Network interface for teaming should be all the same.
Concatct to our sales representative for other than Active-backup
Can mix 1000BASE bonding and 10GBASE-SR bonding within one system
NEC Corporation
–
NEC Express5800/A2040c, A2020c, A2010c, A1040c
Operation Mode
Generic or static Teaming
Dynamic teaming
Switch-independent
Operation Mode
Recommend:
active-backup
(fault-tolerance)
Rev.2.0 –Sep. 2015
Configuration
4 ports in one
card
4 ports among
multiple cards
2 ports in one
card
2 ports among
multiple cards
Configuration
2 ports in one card
2 ports among
multiple cards
2 ports in one card
2 ports among
multiple cards
Number of Teams
Up to 4 ports per one team
Up to 16 teams per one
system
Up to 2 ports per one team
Up to 8 teams per one
system
Number of Bonding
Up to 2 ports per one
bonding
Up to 16 teams
Up to 2 ports per one
bonding
Up to 8 teams
37
Advertisement
Chapters
Table of Contents
