Cadillac 2012 SRX Owner's Manual page 361

Table of Contents

Up-level Vehicle

2. Locate the aim point at the

center inner projector

condensing lens of the low-beam

headlamp, not the outer lens.

3. Measure the distance from the

ground to the aim dot on the

low beam headlamp. Record the

4. At the wall, measure from the

ground upward (A) to the

recorded distance from

Step 3 and mark it.

5. Draw or tape a horizontal line (B)

on the wall the width of the

vehicle at the height of the mark

Vehicle Care

Notice: Do not cover a headlamp

to improve beam cut-off when

aiming. Covering a headlamp may

cause excessive heat build-up

which may cause damage to the

6. Turn on the low-beam

headlamps and place a piece of

cardboard or equivalent in front

of the headlamp not being

adjusted. This allows only the

beam of light from the headlamp

being adjusted to be seen on the

flat surface.

Chapters

Table of Contents