Fog Lamps; Turn Signal Lamps - Cadillac 2012 SRX Owner's Manual

Table of Contents

Fog Lamps

To replace the fog lamp bulb:

1. Locate the bulb assembly under

the front fascia.

2. Disconnect the electrical

connector from the bulb

3. Remove the bulb by turning it

counterclockwise and pulling it

straight out of the assembly.

4. Install the new bulb by turning it

clockwise into the assembly.

5. Reconnect the electrical

connector to the bulb assembly.

To replace one of these bulbs:

1. Open the liftgate. See Liftgate

on page 2 14.

B. Taillamp Cover

2. Pull on push pin (A) to release

the taillamp cover (B).

3. Remove the taillamp cover from

the lamp assembly by pulling

rearward from the top to

unfasten from snap tabs.

Vehicle Care

4. Remove the two screws from the

taillamp assembly.

5. Pull the taillamp assembly

straight back to remove.

Table of Contents