License Plate Lamp; Replacement Bulbs - Cadillac 2012 SRX Owner's Manual
Hide thumbs
Also See for 2012 SRX:
- Owner's manual (512 pages) ,
- Personalization manual (21 pages) ,
- Navigation manual (134 pages)
Table of Contents
Advertisement
10-40
Vehicle Care
License Plate Lamp
To replace one of these bulbs:
1. Open the liftgate. See Liftgate
on page 2 14 for more
information.
Passenger Side Shown,
Driver Side Similar
2. Push the left end of the lamp
assembly towards the right.
3. Turn the lamp assembly down to
remove from liftgate.
A. Bulb Socket
B. Bulb
C. Lamp Assembly
4. Turn the bulb socket (A)
counterclockwise to remove from
lamp assembly (C).
5. Pull the bulb (B) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install into lamp assembly.
7. Turn the lamp assembly into
the liftgate engaging the
clip side first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.
Replacement Bulbs
Exterior Lamp
Back up Lamp
Daytime
Running Lamp
Fog Lamp
Headlamp
High-Beam
Headlamp
Low-Beam
License Plate Lamp
Turn Signal Front
Tail/Turn
Signal Rear
For replacement bulbs not listed
here, contact your dealer.
Bulb
Number
921
7443
H10
9005
H10
194LL
7440
7440
Advertisement
Chapters
Table of Contents
