Table of Contents
Advertisement
To create a SIP profile, select
profile
Use default profile
>
To select the SIP profile you want to use by default for
communication sessions, select
profile.
Edit SIP profiles
Select
Menu
Ctrl. panel
>
SIP
settings.
Select
Options
Edit
and from the following:
>
Profile name
— Enter a name for the SIP profile.
•
Service profile
— Select
•
Default destination
•
for the internet connection.
Default access point
•
for the internet connection.
Public user name
— Enter your user name provided
•
by your service provider.
Use compression
— Select if compression is used.
•
Registration
— Select the registration mode.
•
Use security
— Select if security negotiation is used.
•
Proxy server
— Enter the proxy server settings for this
•
SIP profile.
Registrar server
— Enter the registration server
•
settings for this SIP profile.
Edit SIP proxy servers
Select
Options
New SIP profile
>
server.
Options
New SIP
>
or
Use existing
profile.
Options
Default
>
Settings
and
Connection
>
IETF
or
Nokia
3GPP.
— Select the destination to use
— Select the access point to use
or
Edit
Proxy
>
Proxy servers are intermediate servers between a
browsing service and its users used by some service
providers. These servers may provide additional security
and speed up access to the service.
Select from the following:
Proxy server address
•
address of the proxy server in use.
Realm
— Enter the proxy server realm.
•
User name
and
Password
•
>
password for the proxy server.
Allow loose routing
•
allowed.
Transport type
•
Port
— Enter the port number of the proxy server.
•
Edit registration servers
Select
Options
New SIP profile
>
server.
Select from the following:
Registrar server address
•
IP address of the registrar server in use.
Realm
— Enter the registrar server realm.
•
User name
and
Password
•
password for the registrar server.
Transport type
•
Port
— Enter the port number of the registrar server.
•
Configuration settings
Select
Menu
Ctrl. panel
>
Configurations.
— Enter the host name or IP
— Enter your user name and
— Select if loose routing is
— Select UDP, Automatic, or TCP.
or
Edit
>
— Enter the host name or
— Enter your user name and
— Select UDP, Automatic, or TCP.
Settings
and
Connection
>
Registrar
>
123
Advertisement
Table of Contents
