Filling The Engine With Oil; Installing The Starter Rope - Toro 20792 Operator's Manual

53cm super recycler lawn mower

Hide thumbs Also See for 20792:

Table of Contents

4. Lock the handle at your desired height. Refer to

Adjusting the Handle Height in the Operation

section.

5. Torque the handle bolts to 120 to 160 in-lb (14 to

17 N-m).

6. Adjust the cutting height. Refer to Adjusting the

Cutting Height.

Figure 4

Procedure

Pull the starter rope through the rope guide on the

handle (Figure 5).

1. Starter rope

Note: To make the rope easier to install, squeeze the

control bar on the handle.

3. Filling the Engine with Oil

Procedure

Your mower does not come with oil in the engine.

1. Remove the dipstick (Figure 6).

2. Slowly pour oil into the oil fill tube until the oil level

reaches the Full line on the dipstick (Figure 6). Do

not overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30

detergent oil with an API service classification of SF,

SG, SH, SJ, SL, or higher.)

3. Install the dipstick securely.

Important: Change the engine oil after the first

5 operating hours ; change it yearly thereafter.

Refer to Changing the Engine Oil.

Figure 5

2. Rope guide

Figure 6

Table of Contents