Table of Contents
Advertisement
Quick Links
Download this manual
See also:
Owner's Manual
US-1200
Before connecting this unit to a computer, the dedicated driver must be installed on the computer.
Thank you for your purchase of the TASCAM US-1200 USB2.0
Audio Interface.
This 24-bit/96kHz USB audio interface supports the simulta-
neous input of six audio channels and output of two audio
channels in a 1U rackmount size. The mixer panel that can be
used on a computer display provides a mixer screen and various
IMPORTANT SAFETY PRECAUTIONS
For U.S.A.
INFORMATION TO THE USER
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more
of the following measures.
a) Reorient or relocate the receiving antenna.
b) Increase the separation between the equipment and
receiver.
c) Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
d) Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Changes or modifications to this equipment not expressly
approved by TEAC CORPORATION for compliance could void
the user's authority to operate this equipment.
For Canada
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN
ICES-003. CET APPAREIL NUMERIQUE DE LA CLASSE B EST
CONFORME A LA NORME NMB-003 DU CANADA.
USB2.0 Audio Interface
Quick Start Guide
effects screens with faders, knobs, buttons and other controls
that enable even more intuitive operation.
In this manual we give examples of the basic operation of this
unit. For details, download the Owner's Manual from the TEAC
Global Site (http://teac-global.com/).
This appliance has a serial number located on the rear panel.
Please record the model number and serial number and retain
them for your records.
Model number
Serial number
Model Number :
Trade Name :
Responsible party : TEAC AMERICA, INC.
Address :
Telephone number : 1-323-726-0303
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
We, TEAC EUROPE GmbH. Bahnstrasse 12, 65205
Wiesbaden-Erbenheim, Germany declare in own
responsibility, the TEAC product described in this
manual is in compliance with the corresponding
technical standards.
Declaration of Conformity
US-1200
TASCAM
7733 Telegraph Road, Montebello,
California, U.S.A.
DECLARATION OF CONFORMITY
TASCAM US-1200
D01207420B
1
Advertisement
Table of Contents
Related Manuals for Tascam US-1200
Summary of Contents for Tascam US-1200
-
Page 1: Important Safety Precautions
Quick Start Guide Before connecting this unit to a computer, the dedicated driver must be installed on the computer. Thank you for your purchase of the TASCAM US-1200 USB2.0 effects screens with faders, knobs, buttons and other controls Audio Interface. -
Page 2: Important Safety Instructions
TASCAM US-1200... -
Page 3: Included Items
For European Customers Trademarks Disposal of electrical and electronic equipment • TASCAM is a trademark of TEAC Corporation, registered in (a) All electrical and electronic equipment should be disposed the U.S. and other countries. of separately from the municipal waste stream via desig- •... -
Page 4: Installing The Driver For Windows
For more information about Gatekeeper, see the “Gatekeeper” section of “3 – Installation” in the Owner’s Manual. Driver installation procedures 1. Download the latest driver for the operating system you are using from the TEAC Global Site (http://teac-global.com/). TASCAM US-1200... -
Page 5: Connecting The Usb Cable
Do not turn Phantom power on when connecting a mic that double-click “TASCAM US-1200 X.XX” inside the folder. does not require phantom power. • Turning phantom power on when a dynamic mic or other mic that does not require it is connected could damage the equipment. - Page 6 Making settings on the INTERFACE screen Microphone Guitar Launch the installed driver software. Windows Click the TASCAM US-1200 Mixer Panel icon in the Taskbar Computer MIC IN GUITAR／LINE IN or select TASCAM US-1200 Mixer Panel from TASCAM in All Apps.
-
Page 7: Mac Os X And Itunes
“Audio MIDI Setup”. Then open the “Audio Devices” window. 2. Click “US-1200” to select it, right-click or control-click “US-1200”. Then, click “Use this device for sound output” in the pop-up menu. The speaker mark appears next to “US-1200”. - Page 8 US-1200 TEAC CORPORATION http://tascam.jp/ Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. http://tascam.com/ Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC MEXICO, S.A. de C.V. http://teacmexico.net/ Phone: +52-55-5010-6000 Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México TEAC UK LIMITED http://tascam.eu/...